WEBINAR – Accelerate your electronic designs with defect-free production
Video hosted by YouTube: playing it here means accepting YouTube's cookies.
Question 1: What should we do if we want to bring fabrication back to France for sovereignty reasons? Are reindustrialization and redesign mandatory?
Asked by: Pascal L – 5 Sep 2025 10:10
Answer: Good question, Pascal. Critical products, such as defense, involve sovereignty stakes. National authorities must become aware of this and accept the consequences (price & lead times).
Answered by Christophe LOTZ – 5 Sep 2025 10:12
Question 2: How can design parameters be aligned across manufacturers when each of them uses its own design software?
Asked by: Clement B – 5 Sep 2025 10:13
Answer: answered live
Answered by Christophe LOTZ – 5 Sep 2025 10:17
Question 3: Despite footprint standardization, board manufacturers often recommend other footprints for DFM reasons, most of the time based on their own field experience
Asked by: Pascal L – 5 Sep 2025 10:13
Answer: Work is under way on the footprint question with IPC7351. A presentation is planned for January 2026 at an international conference in Prague.
Answered by Christophe LOTZ – 5 Sep 2025 10:19
Question 4: Will it be possible to have access to the presented slides after the meeting? Thank you
Asked by: Nathan R – 5 Sep 2025 10:13
Answer: Yes, the slides and the recording will be sent to you.
Answered by Sacha MARROT - AFNOR-CEF – 5 Sep 2025 10:15
Answer: The video will also be available on YouTube.
Answered by Grégoire Boulay – 5 Sep 2025 10:16
Question 5: Is the space sector concerned by this spec?
Asked by: Anonymous participant – 5 Sep 2025 10:17
Answer: The scope of the 2212 is not restricted. The space sector can absolutely use it.
Answered by Christophe LOTZ – 5 Sep 2025 10:18
Question 6: Do you have an approximate date for the release of the IEC PAS 2212, officially IEC-branded and downloadable from the IEC website or through the AFNOR Cobaz site?
Asked by: Jean-Philippe V – 5 Sep 2025 10:19
Answer: The IEC/PAS is approved, but the copyright transfer is still under discussion. This point should be settled within a few weeks. The legal solution has been identified between AFNOR and the IEC.
Answered by Christophe LOTZ – 5 Sep 2025 10:21
Question 7: Hello, my question is probably a bit off-topic, my apologies if that is a problem: where and how can one get trained in electronic board design? Or do a refresher. Thank you.
Asked by: Anonymous participant – 5 Sep 2025 10:20
Answer: Grégoire, who will be speaking shortly, offers courses. There are also Campus Esprit in Redon and WeNetwork in Angers.
Answered by Christophe LOTZ – 5 Sep 2025 10:21
Question 8: Hello, entering the 2212 into Allegro through the "Constraint Manager" is not easy, tedious even... Do you share my view? Is there an already-configured script for this tool?
Asked by: Tony C – 5 Sep 2025 10:27
Answer: Native integration of the 2212 into the Cadence tools is under way.
Answered by Christophe LOTZ – 5 Sep 2025 10:32
Question 9: Are there any French PCB manufacturers that do not yet have the know-how to achieve acceptable yields for routing classes 9 or 10?
Asked by: Pascal L – 5 Sep 2025 10:28
Answer: Indeed, not every manufacturer can produce everything. That is also the case in China, where I ran a benchmark in June. Classes 9 and 10 are technological limits.
Answered by Christophe LOTZ – 5 Sep 2025 10:35
Question 10: How does the AFNOR Spec take into account the different capability levels that factories can achieve?
Asked by: Clement B – 5 Sep 2025 10:31
Answer: Routing classes give access to a larger number of manufacturers at the best prices. Every manufacturer has its own limits.
Answered by Christophe LOTZ – 5 Sep 2025 10:34
Question 11: Will the 2212 evolve regularly to take into account manufacturing feedback from boards designed to this spec?
Asked by: Pascal L – 5 Sep 2025 10:34
Answer: answered live
Answered by Christian MAUDET – 5 Sep 2025 10:35
Answer: Yes, that is the principle of a PAS. 3 years to refine it.
Answered by Christophe LOTZ – 5 Sep 2025 11:08
Question 12: I will soon be tackling a board that needs routing, and I would like to use this standard. Do you have a contact at Cadence to try to get this integration as early as possible and spread the word within my company?
Asked by: Tony C – 5 Sep 2025 10:38
Answer: Hello Tony, could you get back to me? I am in charge of getting the 2212 supported by Cadence.
Answered by Christian MAUDET – 5 Sep 2025 10:41
Question 13: Is native integration of the 2212 planned in the Altium tool?
Asked by: Christophe L – 5 Sep 2025 10:40
Answer: See William's presentation, but for my part I have seen nothing on the Altium side since the acquisition by Renesas.
Answered by Christophe LOTZ – 5 Sep 2025 11:06
Question 14: Hello Tony, are the rules available in ALTIUM format?
Asked by: Sébastien B – 5 Sep 2025 10:44
Answer: answered live
Answered by Christian MAUDET – 5 Sep 2025 11:12
Question 15: Hello Christian, yes, I will get back to you and contact you next week about this "SPEC 2212 integration in Allegro" topic. Thank you.
Asked by: Tony C – 5 Sep 2025 10:47
Answer: (no answer recorded)
Question 16: Very good synthesis work, it looks much more digestible and actionable than the IPC standards (2221, 2222…). Do you have a 2212 vs IPC comparison? Even if the approach is different, I imagine that in some cases we will end up with rules that are more or less restrictive depending on the standard used? Put differently: on development projects with China, India, the US… if I use the 2212, do I have an easy way to argue that my design does, or does not, comply with the IPC rules?
Asked by: Romain E – 5 Sep 2025 10:47
Answer: Our DfmExpress tool supports IEC/AFNOR2212 and the IPC standards. It is the best of both worlds.
Answered by Christophe LOTZ – 5 Sep 2025 11:04
Question 17: Thank you for the information
Asked by: Anonymous participant – 5 Sep 2025 10:50
Answer: Thank you for the support
Answered by Christophe LOTZ – 5 Sep 2025 11:04
Question 18: Is integration of the 2212 planned in the Siemens tools (PADS, Xpedition)?
Asked by: Nathan R – 5 Sep 2025 10:50
Answer: Announcements to that effect have been made by Siemens.
Answered by Christophe LOTZ – 5 Sep 2025 11:00
Question 19: Would it be possible to give some clarification on the classes. You explained that these classes are used to set the price of a PCB. For some time now manufacturers have dropped those famous old classes in favor of the IPC ones. I don't really understand the return to classes. Or is it that these classes are only design classes and what drives the price are the IPC classes (1, 2 or 3)
Asked by: Anonymous participant – 5 Sep 2025 10:51
Answer: The routing classes must not be confused with them. Routing classes measure routing complexity, not the target-market classification or reliability. AFNOR Spec 2212 is complementary to the IPC standards.
Answered by Christophe LOTZ – 5 Sep 2025 10:59
Answer: IPC classes 1, 2 and 3 are product classifications:
Answered by Christian MAUDET – 5 Sep 2025 11:00
Answer: IPC classes 1, 2 and 3 are product classifications that affect the price but are independent of the routing classes:
IPC Class 1 products: general-purpose and disposable electronic devices.
IPC Class 2 products: consumer and enhanced professional electronics.
IPC Class 3 products: critical-performance and safety-critical electronics.
Answered by Christian MAUDET – 5 Sep 2025 11:02
Question 20: Hello, is the DFM Express tool free?
Asked by: Anonymous participant – 5 Sep 2025 10:55
Answer: It is a professional tool... so a paid one. Either as a subscription or as a perpetual license. Please contact our sales team through our website.
Answered by Christophe LOTZ – 5 Sep 2025 10:58
Question 21: Can the DfMExpress tool analyze Gerber files rather than the native design data?
Asked by: Mikaël J – 5 Sep 2025 10:55
Answer: An analysis based on Gerber files alone is poorer than an analysis using the native CAD data.
Answered by Christophe LOTZ – 5 Sep 2025 10:57
Question 22: Can this kind of study be subcontracted?
Asked by: Patrice J – 5 Sep 2025 10:56
Answer: Yes, ASTER offers this as a service.
Answered by Christophe LOTZ – 5 Sep 2025 10:56
Question 23: Thank you for this initiative, which was sorely needed. It has always been a real headache.
Asked by: Mickaël B – 5 Sep 2025 10:58
Answer: Thank you. Lots of positive feedback.
Answered by Christophe LOTZ – 5 Sep 2025 11:01
Question 24: Hello, is Altium planning to incorporate the 2212 natively?
Asked by: Jerome V – 5 Sep 2025 10:58
Answer: William's presentation lists the CAD vendors that have started integrating the 2212.
Answered by Christophe LOTZ – 5 Sep 2025 11:00
Question 25: What does the AFNOR Spec bring to DFM beyond what the IPC standards offer?
Asked by: Yohann H – 5 Sep 2025 11:00
Answer: They are complementary. The AFNOR Spec is about being manufacturable by design.
Answered by Christophe LOTZ – 5 Sep 2025 11:01
Question 26: Can the DFM rule library be adapted to match our needs?
Asked by: Erwan R – 5 Sep 2025 11:01
Answer: Yes, our tool is fully programmable and configurable. You can integrate your own rules derived from your field experience.
Answered by Christophe LOTZ – 5 Sep 2025 11:02
Question 27: Hello, how do you keep up with technology developments to keep the manufacturing parameters consistent? As discussed above, classes RC9 and RC10 are technological limits, but a 0.2/0.4 via, for example, ends up in class RC7, which seems high to us since it is fairly standard in Asia.
Asked by: Benoît D – 5 Sep 2025 11:02
Answer: RC9 and RC10 were created to accommodate the future. The IEC/PAS provides for international discussions, with updates to come.
Answered by Christophe LOTZ – 5 Sep 2025 11:03
Question 28: Hello, do you know when integration of the 2212 into Zuken CR8000 is planned? Thank you.
Asked by: BENESCHI D – 5 Sep 2025 11:02
Answer: Work has been announced, but no date that I know of. There will probably be news at the Munich trade show during the week of November 16.
Answered by Christophe LOTZ – 5 Sep 2025 11:05
Question 29: I have to leave, thank you very much for this presentation.
Asked by: Sophie R – 5 Sep 2025 11:06
Answer: answered live
Answered by Christophe LOTZ – 5 Sep 2025 11:07
Question 30: Another question about DFM Express: is it a tool that integrates into the CAD tool, like PCB Flow, or a standalone piece of software? What are the input data for the analyses? Native, ODB, GERBER? Thank you.
Asked by: BENESCHI D – 5 Sep 2025 11:06
Answer: answered live
Answered by Christophe LOTZ – 5 Sep 2025 11:07
Question 31: Why are the dimensions in the Parameters given in mm and not in mils?
Asked by: Sébastien B – 5 Sep 2025 11:08
Answer: Because it is the international unit ... even the IPC standards suggest using mm.
Answered by William MARAIS – 5 Sep 2025 11:13
Question 32: Indeed, back on the 15th, it will be a great pleasure to see you again and to work together!
Asked by: Noémie T – 5 Sep 2025 11:08
Answer: (no answer recorded)
Question 33: Thank you
Asked by: Antony F – 5 Sep 2025 11:08
Answer: (no answer recorded)
Question 34: Thank you very much for this presentation, have a good day.
Asked by: Anonymous participant – 5 Sep 2025 11:09
Answer: (no answer recorded)
Question 35: Thank you very much for all these presentations
Asked by: Jamal R – 5 Sep 2025 11:10
Answer: (no answer recorded)
Question 36: Is the 2212 planned to cover flex circuits?
Asked by: Nathan R – 5 Sep 2025 11:12
Answer: (no answer recorded)
Question 37: Thank you for this webinar! And congratulations on your commitment to the electronics industry
Asked by: Quentin S – 5 Sep 2025 11:14
Answer: (no answer recorded)
Question 38: How can one join the UF91?
Asked by: BENESCHI D – 5 Sep 2025 11:15
Answer: (no answer recorded)
Question 39: Thank you for this excellent, very thorough presentation.
Asked by: Oliviet G – 5 Sep 2025 11:15
Answer: (no answer recorded)
Question 40: Thanks a lot for this webinar.
Asked by: Erwan D – 5 Sep 2025 11:15
Answer: (no answer recorded)
PCB design rules: which values should you choose?
What is AFNOR SPEC 2212?
How to choose your routing class in AFNOR SPEC 2212
Advanced use of the AFNOR SPEC 2212 dynamic routing class ta…
Interview - Christian Maudet - AFNOR SPEC 2212
Interview - Noémie Thoores - AFNOR SPEC 2212
WEBINAR – Accelerate your electronic designs with defect-fre…
AFNOR SPEC 2212 goes international: IEC PAS 63720